Installation process of electric hoist with steel wire rope
Publication Time:
2021-10-22
Author:
Source:
Electric wire rope hoist As a small lifting device, it often needs to be installed by oneself after purchase. So how to install it?
1. After the equipment arrives at the site, the packaging should be opened for inspection to see if the accessories are complete and whether the electric wire rope hoist equipment matches the packing list.
2. Before installing the electric wire rope hoist, check the I-beam to ensure that the buffers at both ends of the I-beam are installed correctly and the connection points are firmly fastened.
3. Before installation, check whether the reducer part of the electric hoist has been filled with the appropriate amount of lubricating oil according to the regulations, and carefully check whether each part is firmly installed and whether the configuration is complete.
4. When installing the electric wire rope hoist, according to the actual situation, a crane can be used for installation, or a winch can be used to set up a pulley group for hoisting.
5. After hoisting, adjust the gap with shims to keep the distance between the electric hoist running wheels and the I-beam within 3-5 mm.
6. Adjust the stopper rod by adjusting the two buffers on the stopper rod so that the stopper rod plays its role during use.
Electric wire rope hoist Hoisting Hoisting is done by pulling with a wire rope from the drum, pressing the remote control, which is very convenient, greatly improving work efficiency and shortening the entire operation time. It is mostly used for outdoor erection, factory hoisting, freight elevator transportation, and construction sites.
Metallurgical electric hoist: The appearance of this electric hoist is different from that of the wire rope electric hoist. There is a baffle plate below the metallurgical electric hoist, which is suitable for lifting molten metal in the metallurgical industry. This baffle plate can effectively prevent substances from splashing onto the electric hoist. In addition, the external materials are also corrosion-resistant and high-temperature resistant, generally working in a temperature environment from minus 10 degrees to above 50 degrees.
The electric wire rope hoist consists of a reducer, drum, rope discharger, crane, hook, electric trolley, electric rack, control box, wire rope, etc. Electric wire rope hoist The upper and lower positions of the motor rotor are different, indicating the conditions when not energized or energized, respectively. The transmission route is motor 1~coupling 2-…input shaft of three-stage gear reducer 3-…reducer output shaft (hollow shaft) 4-drum 5. The brake wheel 8 is located on the right side of the motor.
Recommended News
Analysis of various application scenarios and advantages of electric hoists
2025-01-13
2025-01-02
2024-12-23
Contact Information
Mr. Tang +86-13168489951
No. 8, Fuguang Huanwei Street, Qingxi Town, Dongguan City, Guangdong Province
TDHAFU CRANES
Mobile Website